resettare !! e rendere di nuovo Verginello un 38xx

[Ultimo]

se avrai pazienza , Domani continueremo...

[Wizard]

Ok, lo "sh ver" serve solo x vedere la configurazione del registro. Se è già a posto il router è totalmente vegine e se vuoi puoi venderlo. Se la conf del registro non va bene ti dirò un comando da inserire e dopo sarà a posto.

[Ultimo]

Grazie ,
sei molto Gentile e Sicuramente Molto piu' preparato di Me...
se ci sarai, domani continueremo .

[Ultimo]

Copio tutto quello che vedo, appena accendo l'Apparato 2800 e effettuo prima show ver e dop show run.

Puoi vedere se e' tutto OK ?.. A presto, GRAZIE

APPENA ACCENDO..

System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)
service timestamps log uptime
Technical Support: http://www.cisco.com/techsupporttion
!
hostname Rout
Copyright (c) 2004 by cisco Systems, Inc.net-zero
!
!


PLD version 0x10
GIO ASIC version 0x127
c2801 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled


Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xc100

Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xc100


Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
Unable to read eeprom
Unable to read eeprom
Unable to read eeprom
Unable to read eeprom
0X003AA110 public buffer pools
0X00211000 public particle pools
0X00020000 Crypto module pools
0X00120000 VPM buffer pools

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.

Allocating additional 18291840 bytes to IO Memory.
PMem allocated: 240123904 bytes; IOMem allocated: 28311552 byt

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, 2801 Software (C2801-ENTSERVICESK9
ELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 02-Apr-05 21:22 by yiyan
Image text-base: 0x60074504, data-base: 0x62300000


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 2801 (revision 5.0) with 234496K/27648K bytes of memory.
Processor board
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
125184K bytes of ATA CompactFlash (Read/Write)


--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: n


Press RETURN to get started!


*Oct 9 21:12:48.651: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0/0, changed state to down
*Oct 9 21:12:48.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0/1, changed state to down
*Oct 9 21:12:50.895: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 2801 Software (C2801-ENTSERVICESK9-M), Version 12.3(11)T5, R
ELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 02-Apr-05 21:22 by yiyan
*Oct 9 21:12:50.899: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing
a cold start
*Oct 9 21:12:52.455: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state
to administratively down
*Oct 9 21:12:52.455: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state
to administratively down
Router>enable
Router#show ver
Cisco IOS Software, 2801 Software (C2801-ENTSERVICESK9-M), Version 12.3(11)T5, R
ELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 02-Apr-05 21:22 by yiyan

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

Router uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2801-entservicesk9-mz.123-11.T5.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By usi
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 2801 (revision 5.0) with 234496K/27648K bytes of memory.
Processor board ID FCZ093021AL
2 FastEthernet interfaces
DRAM configuration is 64 bits
191K bytes of NVRAM.
125184K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2142

Router#
Router#
Router#show run
Building configuration...

Current configuration : 666 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
ip cef
!
!
!
!
no ftp-server write-enable
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
end

Router#
Router#

[Wizard]

Configuration register is 0x2142

Non va bene ora.

Devi nettere:

Codice: Seleziona tutto

ena
conf t
config-register 0X2102
exit
wr mem

sh ver

[Ultimo]

lo faro' , e Lunedi' spero di ...rincontrarti...
Ti auguro un Buon fine settimana per ora..

[Wizard]

Ci sentiamo lunedì!

[Ultimo]

Ciao,
ho fatto quanto mi hai indicato... vediamo cosa e' successo ?

COPIO QUELLO CHE SI VEDE , APPENA ACCENDO IL ROUTER:

APPENA ACCENDO :

System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)fer and
Technical Support: http://www.cisco.com/techsupport products does not imply
Copyright (c) 2004 by cisco Systems, Inc.
PLD version 0x10
GIO ASIC version 0x127
c2801 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled


Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xc100

Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xc100

Initializing ATA monitor library.......

program load complete, entry point: 0x8000f000, size: 0x147b344
Self decompressing the image : #################################################
################################################################################
################################################################################
##################### [OK]

Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
Unable to read eeprom
Unable to read eeprom
Unable to read eeprom
Unable to read eeprom
0X003AA110 public buffer pools
0X00211000 public particle pools
0X00020000 Crypto module pools
0X00120000 VPM buffer pools

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.

Allocating additional 18291840 bytes to IO Memory.
PMem allocated: 240123904 bytes; IOMem allocated: 28311552 byt

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, 2801 Software (C2801-ENTSERVICESK9
ELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 02-Apr-05 21:22 by yiyan
Image text-base: 0x60074504, data-base: 0x62300000


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 2801 (revision 5.0) with 234496K/27648K bytes of memory.
Processor board
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
125184K bytes of ATA CompactFlash (Read/Write)



Press RETURN to get started!


*Oct 14 08:58:51.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0/0, changed state to down
*Oct 14 08:58:51.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0/1, changed state to down
Router>ena
Router#sh run
Building configuration...

Current configuration : 666 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
ip cef
!
!
!
!
no ftp-server write-enable
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
end

Router#
Router#
Router#
Router#sh ver
Cisco IOS Software, 2801 Software (C2801-ENTSERVICESK9-M), Version 12.3(11)T5, R
ELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 02-Apr-05 21:22 by yiyan

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

Router uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:c2801-entservicesk9-mz.123-11.T5.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 2801 (revision 5.0) with 234496K/27648K bytes of memory.
Processor board ID FCZ093021AL
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
125184K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Router#
Router#
Router#

[Wizard]

OK, ci siamo!
Brava!
Ora che devi farci con quel router?

[Ultimo]

Grazie, il tuo aiuto e' stato Preziosissimo.

Spero di tornare ad interessarti...

ora quel ruter , lo rivendero' alla persona che era in affitto nel mio locale, e che lo ha lasciato li' per circa un anno....!!

[ronon]

Haaaa ora ho capito.....

[zot]

NO,ferma....rivendilo a me!!!