cisco soho 97

[mauro]

buonasera a tutti !!!

sono nuovo dei forum e quindi scusatemi se dico delle castronerie....

devo settare un router soho 97 - ho già lanciato l'installazione rapida - il router si connette ma non mi fà navigare oltre la pagina di google

so che devo disabilitare il dhcp ma temo di fare danni e perdere la connessione CRWS -

Nella pagina DHCP dopo aver smarcato "attiva DHCP" cos'altro devo settare ?..

quali altri settaggi devo eseguire ???

- linea infostrada 4,8 mbs
- 2 pc
grazie, grazie, grazie

[Wizard]

Secondo te come facciamo a risponderti se non ci fai vedere la configurazione...?!

P.s. Impara ad usare la cli!!!

[mauro]

buonasera a tutti !!!

sono nuovo dei forum e quindi scusatemi se dico delle castronerie....

devo settare un router soho 97 - ho già lanciato l'installazione rapida - il router si connette ma non mi fà navigare oltre la pagina di google

so che devo disabilitare il dhcp ma temo di fare danni e perdere la connessione CRWS -

Nella pagina DHCP dopo aver smarcato "attiva DHCP" cos'altro devo settare ?..

quali altri settaggi devo eseguire ???

- linea infostrada 4,8 mbs
- 2 pc
grazie, grazie, grazie

ecco la CONFIGURAZIONE :



Building configuration...

Current configuration : 2054 bytes
!
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname mauro
!
boot-start-marker
boot-end-marker
!
no logging buffered
enable secret 5 <removed>
!
username CRWS_Gayatri privilege 15 password 7 <removed>
username CRWS_Sangeetha privilege 15 password 7 <removed>
username mauro password 7 <removed>
username CRWS_Santhosh privilege 15 password 7 <removed>
username CRWS_Ritesh privilege 15 password 7 <removed>
ip subnet-zero
ip name-server 10.10.10.2
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool CLIENT
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
lease 0 2
!
!
no aaa new-model
!
!
!
!
no crypto isakmp enable
!
!
!
interface Ethernet0
ip address 10.10.10.1 255.255.255.0
ip nat inside
no ip mroute-cache
hold-queue 100 out
!
interface ATM0
no ip address
no ip mroute-cache
atm vc-per-vp 64
no atm ilmi-keepalive
dsl operating-mode auto
pvc 8/35
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
!
!
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname maugian4@LiberoFlat
ppp chap password 7 14101D0C03
ppp pap sent-username maugian4@LiberoFlat password 7 110E160218
ppp ipcp dns request
ppp ipcp wins request
hold-queue 224 in
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
ip nat inside source list 102 interface Dialer1 overload
!
!
access-list 23 permit 10.10.10.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
control-plane
!
!
line con 0
exec-timeout 120 0
no modem enable
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
access-class 23 in
exec-timeout 120 0
login local
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
!
end

[Wizard]

Guarda anche altri post e metti a posto i valori di mtu sulle interfaccie

[mauro]

cari forumisti !!!!!!!!!!

da umile beginner sono riuscito , dopo aver cancellato la startup-config e averla riscritta completamente a connettere il mio cisco s0h0 97 alla rete - la seguente configurazione mi permette di connettermi con e-mule ( sulle porte 1762/1772 ) ma non riesco a navigare ne con firefox ne con explorer - non capisco che tipo di informazione manca nella conf - vi prego aiutatemi .......

ecco la mia conf- :


------------------ show version ------------------

Cisco IOS Software, SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(7)T9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 05-Apr-05 19:50 by yiyan

ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)

mauro uptime is 3 hours, 58 minutes
System returned to ROM by power-on
System image file is "flash:soho97-k9oy1-mz.123-7.T9.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco SOHO97 (MPC857DSL) processor (revision 0x500) with 58983K/6553K bytes of memory.
Processor board ID FCZ092310AJ (149680160), with hardware revision 0000
CPU rev number 7
1 Ethernet interface
1 ATM interface
128K bytes of NVRAM.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102


------------------ show running-config ------------------


Building configuration...

Current configuration : 2190 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname mauro
!
boot-start-marker
boot-end-marker
!
enable secret 5 <removed>
enable password 7 <removed>
!
username CRWS_Gayatri privilege 15 password 7 <removed>
username mauro password 7 <removed>
username CRWS_Jaidil privilege 15 password 7 <removed>
ip subnet-zero
ip tcp mss 1460
ip name-server 195.210.91.100
ip name-server 193.70.192.100
!
!
no aaa new-model
!
!
!
!
no crypto isakmp enable
!
!
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1460
hold-queue 100 out
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
hold-queue 224 in
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
ppp chap hostname xxxxxxxxxxxx
ppp chap password xxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxx password xxxxxxxx
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
no ip http secure-server
ip nat translation timeout 420
ip nat translation tcp-timeout 120
ip nat translation pptp-timeout 420
ip nat translation udp-timeout 120
ip nat translation finrst-timeout 300
ip nat translation syn-timeout 120
ip nat translation dns-timeout 300
ip nat translation icmp-timeout 120
ip nat translation max-entries 5000
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static tcp 192.168.0.2 1762 interface Dialer0 1762
ip nat inside source static udp 192.168.0.2 1772 interface Dialer0 1772
ip nat inside source static 192.168.0.2 interface Dialer0
ip nat inside source static tcp 192.168.0.2 2180 interface Dialer0 2180
!
!
access-list 1 permit 192.168.0.0 0.0.0.255
!
control-plane
!
!
line con 0
no modem enable
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
exec-timeout 120 0
password 7 <removed>
login local
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
!
end

grazzzzie !!!!!

[mauro]

Guarda anche altri post e metti a posto i valori di mtu sulle interfaccie

-
buonasera !! con questa config da me riscritta riesco a connettere e-mule ma non firefox o altri browser - dove ho sbagliato ??

grazie - mauro

------------------ show running-config ------------------


Building configuration...

Current configuration : 2190 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname mauro
!
boot-start-marker
boot-end-marker
!
enable secret 5 <removed>
enable password 7 <removed>
!
username CRWS_Gayatri privilege 15 password 7 <removed>
username mauro password 7 <removed>
username CRWS_Jaidil privilege 15 password 7 <removed>
ip subnet-zero
ip tcp mss 1460
ip name-server 195.210.91.100
ip name-server 193.70.192.100
!
!
no aaa new-model
!
!
!
!
no crypto isakmp enable
!
!
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1460
hold-queue 100 out
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
hold-queue 224 in
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
ppp chap hostname xxxxxxxxxxxx
ppp chap password xxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxx password xxxxxxxx
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
no ip http secure-server
ip nat translation timeout 420
ip nat translation tcp-timeout 120
ip nat translation pptp-timeout 420
ip nat translation udp-timeout 120
ip nat translation finrst-timeout 300
ip nat translation syn-timeout 120
ip nat translation dns-timeout 300
ip nat translation icmp-timeout 120
ip nat translation max-entries 5000
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static tcp 192.168.0.2 1762 interface Dialer0 1762
ip nat inside source static udp 192.168.0.2 1772 interface Dialer0 1772
ip nat inside source static 192.168.0.2 interface Dialer0
ip nat inside source static tcp 192.168.0.2 2180 interface Dialer0 2180
!
!
access-list 1 permit 192.168.0.0 0.0.0.255
!
control-plane
!
!
line con 0
no modem enable
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
exec-timeout 120 0
password 7 <removed>
login local
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
!
end

[zot]

togli "ip tcp mss 1460" dal global,togli "ip tcp adjust-mss 1460" dalla ethernet...prova......se non va sulla dialer dai "mtu 1492".....prova....se non va,sempre sulla dialer dai "mtu 1500"....praticamente quello che già ti ha detto Wizard....

E' ovvio che i dns sul client sono a posto....giusto?controlla che cmq riesci a pingare un IP pubblico,vedi pure se riesci a pingare un dominio

[mauro]

grazie zot !!!

sono riuscito a risolvere, non avevo impostato i DNS ........ mi darei delle martellate.

spero di diventare almeno un mezzo beginner

ciao