ciao ragazzi,
sto postando il mio sh run del pix xchè non riesco a far accedere i pc tramite il client o vpn cisco o checkpoit.
sui pc gli vado direttamente a settare l'indirizzo privato abilitato e come gw l'indirizzo ip inside del pix..forse il pix non è corretamente configurato?
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 9XXXXXXXXXXXXXXX encrypted
passwd XXXXXXXXXXXXX encrypted
hostname XX-PIX
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list inside_outbound_nat0_acl permit ip any 172.16.0.0 255.255.0.0
access-list outside_cryptomap_dyn_100 permit ip any 172.16.0.0 255.255.0.0
access-list outside_cryptomap_dyn_100_1 permit tcp any 172.16.0.0 255.255.0.0
access-list outside_cryptomap_dyn_100_1 permit ip any 172.16.0.0 255.255.0.0
access-list outside_cryptomap_dyn_20 permit ip any 172.16.0.0 255.255.0.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 82.112.1xx.xx3 255.255.255.xxx
ip address inside 172.16.0.254 255.255.0.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_dhcp 172.16.0.190-172.16.0.199
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 172.16.0.0 172.16.0.0 netmask 255.255.0.0 0 0
route outside 0.0.0.0 0.0.0.0 82.112.1xx.xx5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
sysopt connection permit-l2tp
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto dynamic-map outside_dyn_map 100 match address outside_cryptomap_dyn_100
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-MD5
crypto dynamic-map outside_dyn_map_1 20 set transform-set ESP-3DES-MD5
crypto dynamic-map outside_dyn_map_1 100 match address outside_cryptomap_dyn_100_1
crypto dynamic-map outside_dyn_map_1 100 set transform-set ESP-3DES-MD5
crypto dynamic-map outside_dyn_map_2 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map_2 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map_2
crypto map outside_map interface outside
isakmp enable outside
isakmp enable inside
isakmp nat-traversal 20
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup vpn address-pool vpn_dhcp
vpngroup vpn dns-server 212.31.xxx.xx 212.31.xxx.xx
vpngroup vpn idle-time 1800
vpngroup vpn password ********
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:bcf80ee3410f975481d1ff237762ac06
