CISCO ASA 5505 Connessione Remote VPN

[claudio.luppi]

Buon pomeriggio a tutti,

sono un utente alle prime armi con i dispositivi FIREWALL CISCO.
Ho acquistato da 3 settimane il dispositivo CISCO ASA5505 per effettuare una connessione VPN tramite il Client CISCO da casa mia al mio ufficio.
Il problema che non riesco a risolvere è il seguente :
La connessione VPN viene stabilita correttamente, l'indirizzo alla scheda di rete viene assegnato correttamente, ma non riesco a vedere nessun computer della mia rete, ma in particolar modo non riesco a contattare il mio server.
Ho intuito che nella mia configurazione manca il tunnel tra il mio collegamento vpn e la rete interna o qualcosa del genere.
Non riesco a capire come effettuare questo collegamento.
Chiedevo se qualcuno poteva indicarmi quale errore commetto.

Qui di seguito inserisco la mia configurazione attuale :

Result of the command: "show running-config"

: Saved
:
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password kM8jOWSaiDscfRzp encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.2 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 192.168.0.240 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list ccuoghi_splitTunnelAcl standard permit 10.0.0.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.0.144 255.255.255.240
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
ip local pool vpncisco 10.0.10.150-10.0.10.155 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 10.0.0.3-10.0.0.130 inside
dhcpd enable inside
!

group-policy ccuoghi internal
group-policy ccuoghi attributes
dns-server value 10.0.0.100
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ccuoghi_splitTunnelAcl
username claudio password QwUuRe0hnKfDvicS encrypted privilege 0
username claudio attributes
vpn-group-policy ccuoghi
tunnel-group ccuoghi type ipsec-ra
tunnel-group ccuoghi general-attributes
address-pool vpncisco
default-group-policy ccuoghi
tunnel-group ccuoghi ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:2eb1b9db4caa6dd516c50f4972fa4996
: end

Ringrazio tutti per qualunque supporto possiate darmi.

Cordiali Saluti
Luppi Claudio