Vendo Router Cisco 7507 con due RSP4
Inviato: dom 11 dic , 2005 12:24 pm
Ciao,
Vendo Router Cisco 7507 con due RSP4, di seguito il sh diag + sh ver,
per qualsiasi domanda mi potete contattare via mail. [email protected]
Router(boot)#sh diag
Slot 2:
EEPROM format version 1
Route/Switch Processor 4, HW rev 1.05, board revision A0
Serial number: 21020558 Part number: 73-5512-01
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1A 01 05 01 40 BF 8E 49 15 88 01 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot 3:
EEPROM format version 1
Route/Switch Processor 4, HW rev 1.05, board revision A0
Serial number: 21020588 Part number: 73-5512-01
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1A 01 05 01 40 BF AC 49 15 88 01 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot 31 (virtual):
EEPROM format version 1
Chassis Interface, HW rev 1.01, board revision D0
Serial number: 23513552 Part number: 73-1306-02
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board
EEPROM contents (hex):
0x20: 01 10 01 01 01 66 C9 D0 49 05 1A 02 00 00 00 00
0x30: 68 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Router(boot)#sh ver
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 18-Jul-00 22:22 by htseng
Image text-base: 0x60010908, data-base: 0x6078C000
ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
Router uptime is 3 minutes
System returned to ROM by reload
Running default software
cisco RSP4 (R5000) processor with 65536K/2072K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Chassis Interface.
123K bytes of non-volatile configuration memory.
8192K bytes of Flash internal SIMM (Sector size 256K).
Slave in slot 3 is halted.
Configuration register is 0x2102
Vendo Router Cisco 7507 con due RSP4, di seguito il sh diag + sh ver,
per qualsiasi domanda mi potete contattare via mail. [email protected]
Router(boot)#sh diag
Slot 2:
EEPROM format version 1
Route/Switch Processor 4, HW rev 1.05, board revision A0
Serial number: 21020558 Part number: 73-5512-01
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1A 01 05 01 40 BF 8E 49 15 88 01 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot 3:
EEPROM format version 1
Route/Switch Processor 4, HW rev 1.05, board revision A0
Serial number: 21020588 Part number: 73-5512-01
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1A 01 05 01 40 BF AC 49 15 88 01 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot 31 (virtual):
EEPROM format version 1
Chassis Interface, HW rev 1.01, board revision D0
Serial number: 23513552 Part number: 73-1306-02
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board
EEPROM contents (hex):
0x20: 01 10 01 01 01 66 C9 D0 49 05 1A 02 00 00 00 00
0x30: 68 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Router(boot)#sh ver
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 18-Jul-00 22:22 by htseng
Image text-base: 0x60010908, data-base: 0x6078C000
ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
Router uptime is 3 minutes
System returned to ROM by reload
Running default software
cisco RSP4 (R5000) processor with 65536K/2072K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Chassis Interface.
123K bytes of non-volatile configuration memory.
8192K bytes of Flash internal SIMM (Sector size 256K).
Slave in slot 3 is halted.
Configuration register is 0x2102
