Cisco 827 aiuto

[FOlders]

SAlve a tutti sono nuovo e avrei bisogno di un pare possiedo un cisco 827 dopo la configurazione ho inserito la linea telefonica ma il led della portante CD non si accende, secondo voi è un guasto o ci sono dei modi per farlo ripartite? vi ringrazio anticipatamente

[[Dj][DMX]]

Ci posti la configurazione per favore?

[FOlders]

Ci posti la configurazione per favore?

ok
urrent configuration : 3434 bytes
!
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
no logging buffered
enable secret 5 $1$76t9$5dR1wh0bTgwpyIe5v/lbT.
!
username xxxxx password xxxxxx
aaa new-model
!
!
aaa authentication login default local
aaa authentication ppp default local
aaa authorization network default if-authenticated
aaa session-id unique
ip subnet-zero
ip name-server 62.211.69.150
ip name-server 212.48.4.15
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp excluded-address 192.168.0.110 192.168.0.254
ip dhcp binding cleanup interval 60
!
ip dhcp pool dhcppool
network 192.168.0.0 255.255.255.0
default-router 192.168.0.254
dns-server 62.211.69.150 212.48.4.15
!
!
!
!
!
!
!
interface Ethernet0
ip address 192.168.0.254 255.255.255.0
ip nat inside
no ip mroute-cache
hold-queue 100 out
!
interface ATM0
no ip address
no ip mroute-cache
atm vc-per-vp 64
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode itu-dmt
hold-queue 224 in
!
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username xxxxxxxxx password xxxxxxxxx
!
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static udp 192.168.0.2 4672 interface Dialer1 4672
ip nat inside source static tcp 192.168.0.2 4662 interface Dialer1 4662
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 21
ip nat inside source static udp 192.168.0.4 4673 interface Dialer1 4673
ip nat inside source static tcp 192.168.0.4 4663 interface Dialer1 4663
ip nat inside source static tcp 192.168.0.5 1755 interface Dialer1 1755
ip nat inside source static udp 192.168.0.5 1756 interface Dialer1 1756
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
!
access-list 10 permit any
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
!
line con 0
exec-timeout 0 0
password xxxxxx
transport preferred all
transport output all
stopbits 1
line vty 0 4
exec-timeout 120 0
password xxxxxx
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
!
end