da un po di tempo sto provando a far andare mio router Cisco 1801 con ipv6 ma tutto in vano...
chiedo gentilmente ai piu esperti l'aiuto per risolvere questa dilema...
ecco sh ver
Codice: Seleziona tutto
router_casa#sh ver
Cisco IOS Software, C180X Software (C180X-ADVIPSERVICESK9-M), Version 12.4(11)T3, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 11-Jul-07 14:53 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YH6, RELEASE SOFTWARE (fc1)
router_casa uptime is 1 day, 6 hours, 19 minutes
System returned to ROM by reload at 09:15:15 UTC Fri Dec 2 2016
System restarted at 09:15:52 UTC Fri Dec 2 2016
System image file is "flash:c180x-advipservicesk9-mz.124-11.T3.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1801 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of memory.
Processor board ID FHK1121168A, with hardware revision 0000
9 FastEthernet interfaces
1 ISDN Basic Rate interface
1 ATM interface
31360K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
router_casa#
qua e sh run
Codice: Seleziona tutto
router_casa#sh run
Building configuration...
Current configuration : 4836 bytes
!
! Last configuration change at 15:35:15 UTC Sat Dec 3 2016 by XXXX
! NVRAM config last updated at 15:35:17 UTC Sat Dec 3 2016 by XXXX
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service sequence-numbers
!
hostname router_casa
!
boot-start-marker
boot-end-marker
!
logging buffered 99000
!
no aaa new-model
clock timezone UTC 1
clock summer-time UTC recurring last Sun Mar 2:00 last Sun Oct 3:00
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.0.200 192.168.0.254
!
ip dhcp pool LANCASA
import all
network 192.168.0.0 255.255.255.0
default-router 192.168.0.254
dns-server 8.8.8.8 8.8.4.4 85.37.17.51 85.38.28.97
lease 10
!
ip dhcp pool IP_STATIC_MACPRO_SALONE
host 192.168.0.201 255.255.255.0
client-identifier 0100.17f2.0053.ee
client-name MACPRO_SALONE
lease 15
!
ip dhcp pool IP_STATIC_CISCO_WI-FI
host 192.168.0.253 255.255.255.0
client-identifier 0100.16c7.153e.1a
client-name CISCO_WI-FI
lease 15
!
ip dhcp pool IP_STATIC_VIRTUAL_WINXP
host 192.168.0.251 255.255.255.0
client-identifier 0108.0027.1ddd.4f
client-name VIRTUAL_WINXP
lease 15
!
ip dhcp pool IP_STATIC_TV
host 192.168.0.202 255.255.255.0
client-identifier 0114.bb6e.26d6.d2
client-name SMART_TV_WIFI
lease 30
!
!
ip domain name XXX.com
ip name-server 8.8.8.8
ip name-server 8.8.4.4
ip name-server 85.37.17.51
ip name-server 85.38.28.97
ip ssh time-out 60
ip ssh version 2
!
multilink bundle-name authenticated
!
!
!
!
username XXXXXX privilege 15 password 0 YYYYYYY
!
!
!
!
!
!
interface FastEthernet0
ip address 192.168.20.254 255.255.255.0
shutdown
duplex auto
speed auto
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet1
description COLLEGAMENTO_PC-SALONE
!
interface FastEthernet2
description COLLEGAMENTO_WIFI-CISCO
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
!
interface ATM0
description INTERFACIA_FISICA_ADSL
no ip address
ip mask-reply
ip directed-broadcast
ip route-cache flow
no atm ilmi-keepalive
pvc 8/35
pppoe-client dial-pool-number 1
!
dsl operating-mode auto
!
interface Vlan1
description INTERFACIA_VIRTUALE_LAN
ip address 192.168.0.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ipv6 address autoconfig
ipv6 enable
!
interface Dialer1
description ***ADSL_Alice_7_Mega***
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp pap sent-username aliceadsl password 0 aliceadsl
ppp ipcp dns request
!
interface Dialer2
description Interfacia_per_IPV6
no ip address
encapsulation ppp
dialer pool 1
dialer-group 1
ipv6 address autoconfig
ipv6 enable
ipv6 mtu 1280
ipv6 verify unicast reverse-path
ipv6 dhcp client pd NODE-PD rapid-commit
ipv6 virtual-reassembly
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 0 IPV6@alice6
ppp pap sent-username [email protected] password 0 IPV6@alice6
ppp ipcp dns request
!
interface Dialer19
description TEST
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
ppp authentication pap chap callin
ppp pap sent-username aliceadsl password 0 aliceadsl
ppp ipcp dns request
!
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
no ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer1 overload
!
logging trap debugging
logging source-interface Vlan1
logging 192.168.0.251
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
snmp-server community public RO
snmp-server community private RW
snmp-server location CASA_MIA
snmp-server contact [email protected]
snmp-server manager
!
!
!
!
!
!
control-plane
!
!
line con 0
password xxxx
logging synchronous
login
line aux 0
line vty 0
access-class 1 in
exec-timeout 0 0
session-limit 1
logging synchronous
login local
transport input telnet
line vty 1
exec-timeout 0 45
session-limit 1
logging synchronous
login local
transport input ssh
transport output none
line vty 2 4
no login
transport input none
transport output none
!
ntp clock-period 17180220
ntp update-calendar
ntp server 158.69.145.48
ntp server 37.247.53.178
ntp server 83.103.98.242
ntp server 129.6.15.28
ntp server 212.45.144.3
ntp server 193.204.114.232
ntp server 193.204.114.233
ntp server 212.45.144.206
end
router_casa#
sh dsl int
Codice: Seleziona tutto
router_casa#sh dsl interface
ATM0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM: 0x03 0x2
Chip Vendor ID: 'STMI' 'IFTN'
Chip Vendor Specific: 0x0000 0x71B8
Chip Vendor Country: 0x0F 0xB5
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x0000 0x0000
Modem Vendor Country: 0xB5 0x00
Serial Number Near: FHK1121168ACISCO73916705
Serial Number Far:
Modem Version Near: 12.4(11)T3
Modem Version Far:
Capacity Used: 99% 100%
Noise Margin: 12.0 dB 13.5 dB
Output Power: 16.0 dBm 10.5 dBm
Attenuation: 17.0 dB 2.0 dB
Defect Status: None None
Last Fail Code: None
Watchdog Counter: 0x13
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 12143 (0 spurious)
PHY Access Err: 0
Activations: 1
LED Status: ON
LED On Time: 100
LED Off Time: 100
Init FW: init_AMR-2.6.004.bin
Operation FW: AMR-2.6.004.bin
FW Source: external
FW Version: 2.6.4
DS Channel1 DS Channel0 US Channel1 US Channel0
Speed (kbps): 0 18213 0 1013
Cells: 0 136223293 0 9880688
Reed-Solomon EC: 0 37 0 0
CRC Errors: 0 12 0 0
Header Errors: 0 9 0 0
Total BER: 0E-0 8285E-11
Leakage Average BER: 0E-0 1945E-18
Interleave Delay: 0 33 0 2
LOM Monitoring : Disabled
DMT Bits Per Bin
000: 0 0 0 0 0 0 2 6 7 9 A B C C C C
010: C C C C C C C C D D C C B B B B
020: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
030: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
040: F 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
050: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 E E
060: E E E E D D E E D E E E E E 2 D
070: D D D D D D D D D D D D D D D E
080: D D D D D D D D D D D D D D D C
090: C C C C C C C C C C C C C C C C
0A0: C C C B B C B B C C C C C C C C
0B0: C C C C C C C C C C C D E D D E
0C0: D C D C C D C D C C C C D D C C
0D0: C C C C C C C C C C C C C C C C
0E0: C C C C C C C C C C C C C C C C
0F0: C C C E C C C C C C C C C C C C
100: C C C C C C C C C C C C C C B B
110: B B B B B B B B B B C C C C C C
120: C C C D C C C C D D D D D D D D
130: D D D D D D D D D D D D D D D D
140: D D D D D D D D D D D C C D D C
150: C C C C C C C C C C C C D C C C
160: C C C C B B C B B B B B B B B B
170: B B B B B B B B B B B B B B B B
180: B B B B B B B B B B B C C C C B
190: B C C C B B C C C C C B C C C C
1A0: C C C C C C C C C B C B C B C B
1B0: B B B C B B B B B B B B B B B B
1C0: B B B B B B B B B B B B B B B B
1D0: B B B B B B B A B A A A A A A A
1E0: A A A A A A A A A A A A A A A A
1F0: A A A A A A A A A A A A A A A A
DSL: Training log buffer capability is not enabled
router_casa#
cosa c'e di sbagliato?