salve, qualcuno sa come fare per assegrare sempre lo stesso indirizzo ip ad una scheda ethernet con dhcp?
mi servirebbero propio le righe da mettere in dhcpd.conf
nn ditemi di usare indirizzi fissi, grazie
dhcp finto su debian
Moderatore: Federico.Lagni
- jurgo
- Cisco fan
- Messaggi: 50
- Iscritto il: ven 02 lug , 2004 5:00 pm
- Contatta:
what's friendship?
-
- Cisco fan
- Messaggi: 58
- Iscritto il: mar 22 giu , 2004 7:47 pm
Bene, questa soluzione ottima e mi fa piacere che qualcuno lo chieda... vuol dire che qualcuno la usa!
Buone feste, pinguino!
Codice: Seleziona tutto
host bostick {
hardware ethernet 08:00:00:3b:4f:fa;
fixed-address 192.168.2.17;
}
host banana {
hardware ethernet 08:00:02:01:55:cb;
fixed-address 192.168.2.18;
}
"Jesus Christ! Where are my shared folders?" Bill said...
- jurgo
- Cisco fan
- Messaggi: 50
- Iscritto il: ven 02 lug , 2004 5:00 pm
- Contatta:
si, ma fuori o dentro dalle parentesi grafe che definiscono la sub-net? (subnet ... netmask ...{ } ), cmq grazie mille e buone feste
what's friendship?
- jurgo
- Cisco fan
- Messaggi: 50
- Iscritto il: ven 02 lug , 2004 5:00 pm
- Contatta:
ho provato ad applicare i consigli si samba84 , funziona tutto ma oltre ad eth0 si alza anche un' interfaccia chiamata sit0 così configurata:
sit0 Link encap:IPv6-in-IPv4
inet6 addr: ::10.0.0.8/96 Scope:Compat
inet6 addr: ::127.0.0.1/96 Scope:Unknown
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:24 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
qualcuno sa dirmi come mai?
centra con ipv6?
se l' abbasso funziona tutto lo stesso?
grazie mielle
sit0 Link encap:IPv6-in-IPv4
inet6 addr: ::10.0.0.8/96 Scope:Compat
inet6 addr: ::127.0.0.1/96 Scope:Unknown
UP RUNNING NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:24 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
qualcuno sa dirmi come mai?
centra con ipv6?
se l' abbasso funziona tutto lo stesso?
grazie mielle
what's friendship?
-
- Cisco fan
- Messaggi: 58
- Iscritto il: mar 22 giu , 2004 7:47 pm
Esempio dhcpd.con
SI, sit0 serve per il tunnelling ipv4/ipv6, ignoralo
Codice: Seleziona tutto
# dhcpd.conf - configuration for simple network
# Our global default configurations
option domain-name "testnet.net";
option domain-name-servers 192.168.2.16;
option subnet-mask 255.255.255.0
default-lease-time 600;
max-lease-time 7200;
# On our .1 subnet we will dynamically allocate
# address to any host that requests one using
# either DHCP or BootP.
subnet 192.168.1.0 netmask 255.255.255.0 {
range dynamic-bootp 192.168.1.32 192.168.1.254;
option broadcast-address 192.168.1.255;
option routers 192.168.1.1;
get-lease-hostnames true;
}
# On our .2 subnet we have a mixture of dynamically
# assigned addresses and a collection of hosts that
# should have fixed addresses.
subnet 192.168.2.0 netmask 255.255.255.0 {
range dynamic-bootp 192.168.2.32 192.168.2.254;
option broadcast-address 192.168.2.255;
option routers 192.168.2.1;
}
# Our fixed address hosts belong to a different
# name domain and should have names assigned to
# them in addition to addresses.
group {
option domain-name "apps.testnet.net";
use-host-decl-names on;
host guava {
hardware ethernet 08:00:00:1a:2b:3c;
fixed-address 192.168.2.16;
}
host nectarine {
hardware ethernet 08:00:00:3b:4f:fa;
fixed-address 192.168.2.17;
}
host banana {
hardware ethernet 08:00:02:01:55:cb;
fixed-address 192.168.2.18;
}
}
"Jesus Christ! Where are my shared folders?" Bill said...