seguendo questo topic http://www.ciscoforums.it/viewtopic.php?t=9410
ho provato a configurare l'adsl di telecom alice business 7 mega (quella normalissima con 1 ip statico e il pirellone bianco) sul mio 2610...
Le interfacce son configurate correttamente ma non c'è verso di pingare alcun host verso internet... si accettano consigli/proposte/insulti!
Ecco la configurazione:
Codice: Seleziona tutto
version 12.4
service timestamps debug datetime
service timestamps log datetime
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
enable secret 5 xxxxxxxxxxxxxxxxxxx
enable password 7 xxxxxxxxxxxxxxxxxxxxxx
!
ip name-server 212.216.172.62
ip name-server 212.216.112.112
!
interface Null0
no ip unreachables
!
interface ATM0/0
no shut
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0/0.1 point-to-point
no shut
ip address xxx.xxx.xxx.xxx 255.255.255.252
ip nat outside
pvc 8/35
!
interface Ethernet0/0
description Lan
no shut
ip address 10.1.1.32 255.255.255.0
no ip unreachables
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
full-duplex
hold-queue 100 out
!
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
!
interface Serial1/0
no ip address
shutdown
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
no ip http server
no ip http secure-server
ip nat inside source list 100 interface ATM0/0.1 overload
!
access-list 100 permit ip 10.1.1.0 0.0.0.255 any
access-list 101 deny tcp any any eq telnet
access-list 101 deny udp any any eq snmp
access-list 101 deny udp any any eq snmptrap
access-list 101 permit ip any any
!
ip route 0.0.0.0 0.0.0.0 ATM0/0.1
!
no cdp run
no scheduler allocate
control-plane
no aaa new-model
resource policy
ip cef
!
line con 0
line aux 0
line vty 0 4
password 7 xxxxxxxxxxxxx
login
!
ntp clock-period 17208590
ntp server 193.204.114.105
!
end
Codice: Seleziona tutto
ATM0/0 is up, line protocol is up
Hardware is DSLSAR (with Alcatel ADSL Module)
MTU 4470 bytes, sub MTU 4470, BW 480 Kbit, DLY 1060 usec,
reliability 90/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
23 maximum active VCs, 256 VCs per VP, 1 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output 00:00:23, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2 packets input, 148 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
36 packets output, 3624 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
ATM0/0.1 is up, line protocol is up
Hardware is DSLSAR (with Alcatel ADSL Module)
Internet address is xxx.xxx.xxx.xxx/30
MTU 4470 bytes, BW 480 Kbit, DLY 1060 usec,
reliability 90/255, txload 1/255, rxload 1/255
Encapsulation ATM
2 packets input, 148 bytes
36 packets output, 3768 bytes
0 OAM cells input, 0 OAM cells output
AAL5 CRC errors : 0
AAL5 SAR Timeouts : 0
AAL5 Oversized SDUs : 0
0 packets input, 0 bytes
0 packets output, 0 bytes
Last clearing of "show interface" counters never
