mi potete per favore dire come configurare un 1831 con modulo ADSL?
Io ho questi parametri:
Login
Password
Protocollo: PPPoA
Encapsulation: VCmux
VPI: 8
VCI: 35
E ho 8 indirizzi pubblici assegnati (subnet mask 255.255.255.248).
L'indirizzo della ptp immagino che lo prenda dinamicamente.
io l'ho già configurato così
Codice: Seleziona tutto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
no ip source-route
ip cef
!
no ip domain lookup
multilink bundle-name authenticated
!
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$
ip address x.x.x.x 255.255.255.248
no ip proxy-arp
ip virtual-reassembly
load-interval 30
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
bundle-enable
dsl operating-mode auto
hold-queue 224 in
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Dialer0
ip address negotiated
ip virtual-reassembly
encapsulation ppp
dialer pool 1
no cdp enable
ppp chap hostname xxxxxl
ppp chap password 0 xxxxx
ppp pap refuse
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
no ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
no cdp run
!
control-plane
!
eventualmente come posso fare per capire se la linea è su e non è un problemadi linea?
Grazie a tutti
Roberto