Pagina 1 di 2
Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: dom 05 nov , 2017 1:20 pm
da borgorosso
Possiedo un Cisco 1801 che utilizzo con un ADSL Alice a 10 mb.
Ieri sono passato ad Alice a 20 mb e il Cisco ha smesso di funzionare.
Devo modificare qualcosa nella configurazione del router per poterlo far lavorare a 20 mb?
Penso sia cambiato il protocollo da ppp a pppoe, se fosse così quali sono i parametri da modificare?
Solo in questa parte di configurazione o anche altri parametri?
Codice: Seleziona tutto
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
!
interface Vlan1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
!
interface Dialer1
ip ddns update noip
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp pap sent-username aliceadsl password 7 094D42001A0016161800
ppp ipcp dns request
ppp ipcp route default
Se si quale parametri della configurazione devo esattamente modificare?
Grazie.
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: lun 06 nov , 2017 5:38 pm
da borgorosso
Qualche aiuto? Grazie
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: lun 06 nov , 2017 9:08 pm
da punker
Ciao, ma il router si allinea?
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 5:10 am
da borgorosso
Si allinea ma non va su la connessione dati
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 10:02 am
da paolomat75
Ciao.
Hai provato a fare debug dell'autenticazione PPP come ti ho suggerito domenica su Skype?
.
Dalla tua configurazione si vede che usi solo il PAP, prova ad usare il CHAP
Codice: Seleziona tutto
interface Dialer1
no ppp pap sent-username aliceadsl password 7 094D42001A0016161800
ppp authentication chap callin
ppp chap hostname username
ppp chap password password
Paolo
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 1:54 pm
da borgorosso
Ho fatto la modifica e al comando debug ppp authentication mi compare PPP authentication debugging is on
Ma il router non funziona ancora ora è configurato così
Codice: Seleziona tutto
Building configuration...
Current configuration : 4256 bytes
!
version 15.1
service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
service password-encryption
!
hostname gw-miani
!
boot-start-marker
boot-end-marker
!
!
logging buffered 32768 informational
no logging console
no logging monitor
enable secret 5 $1$Og.2$PTsNhQSSmymJR95oto8KU/
!
aaa new-model
!
!
aaa authorization network default local
!
!
!
!
!
aaa session-id common
!
clock timezone UTC+1 1 0
clock summer-time UTC+2 recurring last Sun Mar 2:00 last Sun Oct 3:00
crypto pki token default removal timeout 0
!
!
dot11 syslog
ip source-route
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.100
ip dhcp excluded-address 192.168.1.120 192.168.1.254
!
ip dhcp pool local
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 85.37.17.56 85.38.28.98
!
!
!
ip cef
ip domain name no-ip.org
ip ddns update method noip
HTTP
add http://[email protected]/nic/updatehostname=dangroup&myip=
<a>
interval maximum 28 0 0 0
!
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
license udi pid CISCO1801 sn FCZ131391RN
username daniele secret 5 $1$Voga$OadEUk7ZUYI48bhG8GADr1
!
!
ip ssh version 2
!
!
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
!
crypto isakmp client configuration group admins
key sjhd73jgggugb87780sds
pool remotes
acl acl_splt
save-password
!
!
crypto ipsec transform-set esp-aes256-sha esp-aes 256 esp-sha-hmac
!
crypto dynamic-map dyn 1
set security-association lifetime seconds 28800
set transform-set esp-aes256-sha
!
!
crypto map stat client authentication list default
crypto map stat isakmp authorization list default
crypto map stat client configuration address respond
crypto map stat 10 ipsec-isakmp dynamic dyn
!
!
!
!
!
interface ATM0
no ip address
load-interval 30
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
!
interface Vlan1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
!
interface Dialer1
ip ddns update noip
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname username
ppp chap password 7 08314D5D1A0E0A0516
ppp ipcp dns request
ppp ipcp route default
crypto map stat
!
ip local pool remotes 192.168.250.1 192.168.250.6
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
ip nat inside source list acl_nat interface Dialer1 overload
ip nat inside source static udp 192.168.1.2 18969 interface Dialer1 18969
ip nat inside source static tcp 192.168.1.7 11183 interface Dialer1 11183
ip nat inside source static udp 192.168.1.7 11193 interface Dialer1 11193
ip nat inside source static tcp 192.168.1.65 16346 interface Dialer1 16346
ip nat inside source static udp 192.168.1.65 16357 interface Dialer1 16357
ip route 10.0.0.0 255.255.255.0 192.168.1.2
ip route 192.168.7.0 255.255.255.0 192.168.1.2
!
ip access-list standard acl_vty
permit 192.168.1.0 0.0.0.255
permit 192.168.250.0 0.0.0.7
permit 193.110.151.0 0.0.0.255
!
ip access-list extended acl_nat
deny ip 192.168.1.0 0.0.0.255 192.168.250.0 0.0.0.7
permit ip 192.168.1.0 0.0.0.255 any
ip access-list extended acl_splt
permit ip 192.168.1.0 0.0.0.255 any
!
logging esm config
no logging trap
dialer-list 1 protocol ip permit
no cdp run
!
!
!
!
!
!
!
control-plane
!
!
banner motd ^CC
------------------------------------------
PRIVATE ADSL ROUTER
Unauthorized access is prohibited
Ogni accesso non autorizzato e' proibito
------------------------------------------
^C
!
line con 0
stopbits 1
line aux 0
line vty 0 4
access-class acl_vty in
transport input telnet ssh
!
ntp server 193.204.114.232
ntp server 193.204.114.233
end]
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 2:04 pm
da paolomat75
Non mi sono spiegato bene, username e password devi cambiarla in aliceadsl aliceadsl.
Per configurare ti colleghi sulla porta console o via telnet/ssh? In questo ultimo caso devi dare il comando
.
Paolo
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 2:10 pm
da borgorosso
uso hyperterminal per collegarmi al router tramite porta seriale e cavo apposito
Ora ho digitato nel seguente modo:
Codice: Seleziona tutto
interface Dialer1
no ppp pap sent-username aliceadsl password 7 094D42001A0016161800
ppp authentication chap callin
ppp chap hostname aliceadsl
ppp chap password aliceadsl
Corretto?
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 2:17 pm
da borgorosso
Adesso è così e non va. Non si modifica la ppp chap password
Codice: Seleziona tutto
Building configuration...
Current configuration : 4322 bytes
!
! Last configuration change at 14:03:46 UTC+1 Tue Nov 7 2017
!
version 15.1
service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
service password-encryption
!
hostname gw-miani
!
boot-start-marker
boot-end-marker
!
!
logging buffered 32768 informational
no logging console
no logging monitor
enable secret 5 $1$Og.2$PTsNhQSSmymJR95oto8KU/
!
aaa new-model
!
!
aaa authorization network default local
!
!
!
!
!
aaa session-id common
!
clock timezone UTC+1 1 0
clock summer-time UTC+2 recurring last Sun Mar 2:00 last Sun Oct 3:00
crypto pki token default removal timeout 0
!
!
dot11 syslog
ip source-route
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.100
ip dhcp excluded-address 192.168.1.120 192.168.1.254
!
ip dhcp pool local
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 85.37.17.56 85.38.28.98
!
!
!
ip cef
ip domain name no-ip.org
ip ddns update method noip
HTTP
add http://xxxxxx:[email protected]/nic/updatehostname=dangroup&myip=
<a>
interval maximum 28 0 0 0
!
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
license udi pid CISCO1801 sn FCZ131391RN
username daniele secret 5 $1$Voga$OadEUk7ZUYI48bhG8GADr1
!
!
ip ssh version 2
!
!
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
!
crypto isakmp client configuration group admins
key sjhd73jxxxxxxxxxxxxxx099080sds
pool remotes
acl acl_splt
save-password
!
!
crypto ipsec transform-set esp-aes256-sha esp-aes 256 esp-sha-hmac
!
crypto dynamic-map dyn 1
set security-association lifetime seconds 28800
set transform-set esp-aes256-sha
!
!
crypto map stat client authentication list default
crypto map stat isakmp authorization list default
crypto map stat client configuration address respond
crypto map stat 10 ipsec-isakmp dynamic dyn
!
!
!
!
!
interface ATM0
no ip address
load-interval 30
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
!
interface Vlan1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
!
interface Dialer1
ip ddns update noip
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname aliceadsl
ppp chap password 7 1108150C14170A081726
ppp ipcp dns request
ppp ipcp route default
crypto map stat
!
ip local pool remotes 192.168.250.1 192.168.250.6
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
ip nat inside source list acl_nat interface Dialer1 overload
ip nat inside source static udp 192.168.1.2 18969 interface Dialer1 18969
ip nat inside source static tcp 192.168.1.7 11183 interface Dialer1 11183
ip nat inside source static udp 192.168.1.7 11193 interface Dialer1 11193
ip nat inside source static tcp 192.168.1.65 16346 interface Dialer1 16346
ip nat inside source static udp 192.168.1.65 16357 interface Dialer1 16357
ip route 10.0.0.0 255.255.255.0 192.168.1.2
ip route 192.168.7.0 255.255.255.0 192.168.1.2
!
ip access-list standard acl_vty
permit 192.168.1.0 0.0.0.255
permit 192.168.250.0 0.0.0.7
permit 193.110.151.0 0.0.0.255
!
ip access-list extended acl_nat
deny ip 192.168.1.0 0.0.0.255 192.168.250.0 0.0.0.7
permit ip 192.168.1.0 0.0.0.255 any
ip access-list extended acl_splt
permit ip 192.168.1.0 0.0.0.255 any
!
logging esm config
no logging trap
dialer-list 1 protocol ip permit
no cdp run
!
!
!
!
!
!
!
control-plane
!
!
banner motd ^CC
------------------------------------------
PRIVATE ADSL ROUTER
Unauthorized access is prohibited
Ogni accesso non autorizzato e' proibito
------------------------------------------
^C
!
line con 0
stopbits 1
line aux 0
line vty 0 4
access-class acl_vty in
transport input telnet ssh
!
ntp server 193.204.114.232
ntp server 193.204.114.233
end
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 2:33 pm
da paolomat75
Continui a non ricevi niente nel debug?
Paolo
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 2:37 pm
da borgorosso
come si fa il debug, non sono molto pratico
Da Hyperterminal ho digitato il comando debug ppp authentication mi compare PPP authentication debugging is on
Poi non si modifica la ppp chap password, rimane sempre la vacchia
Interface ATM0 non va modificato?
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 3:28 pm
da paolomat75
Domanda stupida, con il router telecom la linea va?
Paolo
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mar 07 nov , 2017 3:38 pm
da borgorosso
certo che va
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: mer 08 nov , 2017 8:31 am
da borgorosso
Paolomat75 hai un messaggio privato
Re: Upgrade da 10 a 20 MB Alice Cisco 1801 ko
Inviato: gio 09 nov , 2017 6:39 am
da borgorosso
Posto la configurazione funzionante con la mia alice 10 mb e vpn abilitata se a qualcuno può servire
Codice: Seleziona tutto
Building configuration...
Current configuration : 4365 bytes
!
version 15.1
service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
service password-encryption
!
hostname gw-ertieo
!
boot-start-marker
boot-end-marker
!
!
logging buffered 32768 informational
no logging console
no logging monitor
enable secret 5 $1$Og.2$PTsNhQSSmymJR95oto8KU/
!
aaa new-model
!
!
aaa authorization network default local
!
!
!
!
!
aaa session-id common
!
clock timezone UTC+1 1 0
clock summer-time UTC+2 recurring last Sun Mar 2:00 last Sun Oct 3:00
crypto pki token default removal timeout 0
!
!
dot11 syslog
ip source-route
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.100
ip dhcp excluded-address 192.168.1.120 192.168.1.254
!
ip dhcp pool local
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 85.37.17.56 85.38.28.98
!
!
!
ip cef
ip domain name no-ip.org
ip ddns update method noip
HTTP
add http://swertob:[email protected]/nic/updatehostname=werugroup&myip=
<a>
interval maximum 28 0 0 0
!
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
license udi pid CISCO1801 sn FCZ131391RN
username roberto secret 5 $1$Voga$OadEUk7ZUYI48bhG8GADr1
!
!
ip ssh version 2
!
!
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
!
crypto isakmp client configuration group dfertygb
key 1234567896546442322nfds
pool remotes
acl acl_splt
save-password
!
!
crypto ipsec transform-set esp-aes256-sha esp-aes 256 esp-sha-hmac
!
crypto dynamic-map dyn 1
set security-association lifetime seconds 28800
set transform-set esp-aes256-sha
!
!
crypto map stat client authentication list default
crypto map stat isakmp authorization list default
crypto map stat client configuration address respond
crypto map stat 10 ipsec-isakmp dynamic dyn
!
!
!
!
!
interface ATM0
no ip address
load-interval 30
no atm ilmi-keepalive
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
!
interface Vlan1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
!
interface Dialer1
ip ddns update noip
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer idle-timeout 0
dialer persistent
dialer-group 1
ppp authentication pap callin
ppp chap hostname aliceadsl
ppp chap password 7 060703284F4B081D161B
ppp pap sent-username aliceadsl password 7 1108150C14170A081726
ppp ipcp dns request
ppp ipcp route default
crypto map stat
!
ip local pool remotes 192.168.250.1 192.168.250.6
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
ip nat inside source list acl_nat interface Dialer1 overload
ip nat inside source static udp 192.168.1.2 18969 interface Dialer1 18969
ip nat inside source static tcp 192.168.1.7 11183 interface Dialer1 11183
ip nat inside source static udp 192.168.1.7 11193 interface Dialer1 11193
ip nat inside source static tcp 192.168.1.65 16346 interface Dialer1 16346
ip nat inside source static udp 192.168.1.65 16357 interface Dialer1 16357
ip route 10.0.0.0 255.255.255.0 192.168.1.2
ip route 192.168.7.0 255.255.255.0 192.168.1.2
!
ip access-list standard acl_vty
permit 192.168.1.0 0.0.0.255
permit 192.168.250.0 0.0.0.7
permit 193.110.151.0 0.0.0.255
!
ip access-list extended acl_nat
deny ip 192.168.1.0 0.0.0.255 192.168.250.0 0.0.0.7
permit ip 192.168.1.0 0.0.0.255 any
ip access-list extended acl_splt
permit ip 192.168.1.0 0.0.0.255 any
!
logging esm config
no logging trap
dialer-list 1 protocol ip permit
no cdp run
!
!
!
!
!
!
!
control-plane
!
!
banner motd ^CC
------------------------------------------
PRIVATE ADSL ROUTER
Unauthorized access is prohibited
Ogni accesso non autorizzato e' proibito
------------------------------------------
^C
!
line con 0
stopbits 1
line aux 0
line vty 0 4
access-class acl_vty in
transport input telnet ssh
!
ntp server 193.204.114.232
ntp server 193.204.114.233
end